ServicesWhole-Home Filtration
Whole-Home Filtration in Anthem
Chlorine you can smell in a hot shower, or water that makes your coffee taste flat: a carbon filter on your main line handles both before water reaches any fixture. We size the system to your house, connect it to code and show you how it runs.

One filter, every faucet
This system is a tank of activated carbon placed at the point where city water enters your home. Everything downstream gets treated: the water heater, every shower, the laundry and the kitchen sink. Carbon holds onto the chlorine that utilities add for safety, so the taste and smell are gone, and a sediment stage can catch the grit that clogs aerators.
Carbon does not touch hardness. Water here carries plenty of minerals, so a lot of our customers add water softener installation at the same time. Each unit has its own job: the filter takes care of taste and smell, the softener takes care of scale. Putting the carbon first also shields softener resin from chlorine, which helps it last longer.
Because the tank sits on your main supply, how it is connected matters as much as the equipment itself. We tell you what the plumbing code asks for at each step and why, so nothing about the install is a mystery.
What we do on every install
- A system sized for your house
- We look at how many bathrooms you have, how many people live there and the diameter of your main line. An undersized tank lets pressure sag when the dishwasher and a shower run together, so we match the tank to real use.
- Bypass and isolation valves
- A bypass lets you keep water on if the system ever needs service. Shutoffs on the inlet and outlet sides make future work simple, and we use the correct transition fittings where copper meets other pipe.
- Code-correct drain connection
- Backwashing tanks discharge water. We route that line to an approved drain with an air gap, the separation code calls for so wastewater can never siphon back into the lines you drink from.
- Continuous electrical bonding
- In many houses the metal water pipe is part of the electrical grounding path. A filter with a plastic body interrupts it, so we add a bonding jumper around the system.
- Local requirements checked
- Before install day we confirm what your jurisdiction requires for this work and take care of the permit and inspection scheduling whenever one applies.
- Startup, cleanup and a walkthrough
- We flush fresh media, test each joint, program the control valve and show you the bypass handle. Boxes and old fittings go with us.
When whole-home filtration is worth it
Bathrooms smell like bleach
Steam carries chlorine into the air, so the smell is strongest in a hot shower. A kitchen pitcher can't help there, but carbon at the main line can.
You buy water for the taste
If cases of bottled water are mostly about flavor, treating the supply fixes it for drinking, cooking, coffee and ice.
Specks in aerators
Grit in faucet screens or the washer inlet means sediment is moving through your pipes. A pre-filter stage stops it first.
Too many small filters
Shower head cartridges, a fridge cartridge and a pitcher, each on its own schedule. One system at the main line can retire most of them.
A softener is going in
With the pipes already open, it's an efficient time to place carbon ahead of the softener and protect its resin.
From first call to clean water
- 1
We talk it over by phone
Tell us what you notice and where your main line enters, often the garage. A few questions about your plumbing help us arrive with the right parts.
- 2
We look at your setup
We check pipe material, the entry point, nearby drain and outlet access, and whether the builder left a loop for treatment equipment. You receive a written estimate with each item listed.
- 3
Paperwork before the work
If your jurisdiction requires a permit, we file it ahead of time and let you know whether an inspector will visit.
- 4
The install
With the main valve closed, we cut in the tank and valves, connect the drain with its air gap and fit the bonding jumper. Most homes have running water again before we pack up.
- 5
Flush and handoff
We rinse the media, look over every connection, set the valve and show you where everything is. If questions come up later, just pick up the phone.

What shapes your price
No two plumbing layouts match, so we give you a number only after we've seen where your main line runs and what sits around it. Your written estimate breaks out each part and each task separately, so the final bill lines up with what you approved.
- Tank size and media
- More bathrooms and higher flow call for a larger tank. A sediment pre-filter or added media types also change the total.
- Reaching the main line
- A ready-made loop in the garage keeps labor light. Rerouting pipe or opening drywall to get to the supply takes more time and material.
- Drain and outlet access
- An approved drain and an outlet close by keep things simple. Running a new drain with an air gap, or bringing power to the spot, adds work.
- Inspection fees
- Where the local office requires one, the permit fee and inspection appear on your estimate as their own line.
Common questions about whole-home filters
Something not covered here? (623) 343-8120
Will this filter soften my water?
No. Carbon takes out chlorine taste, odor and sediment, but calcium and magnesium pass right through it. For white scale on faucets and shower glass you need a water softener, and both can run on the same line with no trouble.
Do I need a permit for this?
It varies with your address and how much work the job involves. We check the rules for your home before booking, and if a permit applies, we file it and set up the inspection with you.
Will my water pressure drop?
Not noticeably, as long as the system is sized right. Pressure loss usually points to a tank too small for the house, so we size ours by your fixture count and pipe diameter.
What warranty covers the install?
The filter install comes with a 2-year labor warranty plus a 2-year installation warranty. Add a softener on the same visit and its valve body, resin tank and salt tank carry lifetime coverage.
How much upkeep does it need?
A backwashing system cleans itself on a schedule set at the control valve. The carbon wears out slowly over years, and when you start smelling chlorine again, the media is usually due for replacement.
Is reverse osmosis a better fit?
Each does a different job. A whole-home filter treats the water at every tap, and an under-sink reverse osmosis unit treats drinking and cooking water more finely. Plenty of homes have both.

Let's get the chlorine out of your water
Describe what bothers you about your water and where the supply comes in. We'll suggest a system, explain the code items that apply to your house, and give you your quote by phone.